Cisco XR 12000 User Manual

show controllers fabricq drop
To display the number of packets dropped to the fabric or from the fabric on a per-slot basis in the fabric
queue driver, use the show controllers fabricq drop command in administration EXEC mode.
show controllers fabricq drop [detail] [location node-id]
Syntax Description
(Optional) Displays detailed statistical information.detail
(Optional) Displays statistical information for the designated node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
Information about packet drops for all route processors (RPs) on the router is displayed
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show controllers fabricq drop command to display statistics about packet drops. Specifying a location
displays information only if that location is an RP. Use the detail keyword to display detailed output.
The show controllers fabricq drop command is typically used for debugging purposes.Note
Task ID
OperationsTask ID
read, writeroot-system
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
102 OL-30353-01
Fabric Management Commands
show controllers fabricq drop

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English