Cisco XR 12000 User Manual

show tbm hardware
To displays tree bitmap hardware-related information, use the show tbm hardware command in EXEC mode.
show tbm hardware {ipv4| ipv6| mpls| vpnv4| table-id| afi-all| sw-only| dual| egress| ingress} {unicast|
multicast| safi-all} {dual| egress| ingress| sw-only} {brief| detail| lookup| prefix prefix-hex-string} location
node-id
Syntax Description
Specifies IP Version 4 address prefixes.ipv4
Specifies IP Version 6 address prefixes.ipv6
Specifies MPLS-related tree bitmap information.mpls
Specifies VPNv4-related tree bitmap information.vpnv4
Specifies tree bitmap information for a specific table ID.table-id
Specifies IPv4 and IPv6 commands.afi-all
Specifies software-only tree bitmap information.sw-only
Specifies tree bitmap information for dual, ingress, and egress, modes.dual
Specifies egress tree bitmap information.egress
Specifies ingress tree bitmap information.ingress
Specifies unicast address prefixes.unicast
Specifies multicast address prefixes. This option is supported for IPv4 address
families.
multicast
For subaddress family, specifies prefixes for all subaddress families. This
option is supported for IPv4 address families.
safi-all
Specifies ingress and egress tree bitmap information.dual
Displays brief information.brief
Displays detailed information.detail
Displays key or address information to look up (longest match) in the table.lookup
Displays prefix-related information.prefix
Displays tree bitmap hardware-related information for a specified node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
80 OL-30353-01
Troubleshooting Commands
show tbm hardware

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English