Cisco XR 12000 User Manual

show netio db
To display Network Input and Output (Netio) database information for an interface, use the show netio db
command in EXEC mode.
show netio db {caps | dll | proto} [location node-id]
Syntax Description
Displays the capsulations in the Netio database.caps
Displays the dlls loaded in the Netio database.dll
Displays the protocol in the Netio database.proto
(Optional) Displays Netio database information for a specified node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.8.0
No modifications.Release 3.9.0
No modifications.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readcisco-support
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
58 OL-30353-01
Troubleshooting Commands
show netio db

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English