Cisco XR 12000 User Manual

show controllers fabricq output
To display the fabric output service statistics associated with the fabric queue driver, use the show controllers
fabricq output command in administration EXEC mode.
show controllers fabricq output [location node-id]
Syntax Description
(Optional) Displays statistical information for the designated node. The
node-id argument is entered in the rack/slot/module notation.
location node-id
Command Default
Information is displayed for all route processors (RPs) on the router..
Command Modes
Administration EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show controllers fabricq output command to display to fabric output service statistics. Specifying
a location displays information only if that location is an RP.
The service time is the time from when the RP CPU has made the packet ready to be sent to the slot to when
the Field-Programmable Gate Array (FPGA) has put the packet on the queue to that particular slot.
The show controllers fabricq output command is typically used for debugging purposes.Note
Task ID
OperationsTask ID
read, writeroot-system
Examples
The following is sample output from the show controllers fabricq output command for location 0/1/CPU0:
RP/0/0/CPU0:router# admin
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
112 OL-30353-01
Fabric Management Commands
show controllers fabricq output

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English