Cisco XR 12000 User Manual

show tech-support ppp
To automatically run show commands that display information specific to Point to Point Protocol (PPP)
debugging, use the show tech-support ppp command in EXEC mode.
show tech-support ppp [file send-to] [background] [compressed| uncompressed] [interface type instance]
[location node-id| all] [rack]
Syntax Description
Specifies that the command output is saved to a specified file.file
Name of the file. The following valid options are listed:
•
filename
•
bootflash: filename
•
disk0: filename
•
disk0a: filename
•
disk1: filename
•
disk1a: filename
•
ftp: filename
•
harddisk: filename
•
harddiska: filename
•
harddiskb: filename
•
nvram: filename
•
rcp: filename
•
tftp: filename
send-to
(Optional) Specifies that the command runs in the background.background
(Optional) Displays compressed command output.compressed
(Optional) Displays the command output with no compression.uncompressed
Collects information about a specific interface.interface
Interface type. For more information, use the question mark (?) online help function.
type
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
300 OL-30353-01
Tech-Support Commands
show tech-support ppp

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English