Cisco XR 12000 User Manual

Command History
ModificationRelease
This command was introduced.Release 3.2
Index and operation modes were not supported.Release 3.5.0
The following keywords were added:
•
shadow
•
ingress
•
egress
Release 3.7.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show uidb indexcommand to display micro-IDB index data information including, from a software
perspective, features that are enabled on a selected interface.
Task ID
OperationsTask ID
readcisco-support
Examples
The following example shows the output of the show uidb datacommand:
RP/0/0/CPU0:router# sh uidb data shadow ingress gigabitEthernet 0/2/4/4 loc 0/2/CPU0
--------------------------------------------------------------------------
Location = 0/2/CPU0
Ifname/Ifhandle = GigabitEthernet0_2_4_4 / 0x12800a0
Index = 5
Pse direction = INGRESS
============================================
* (Not programmed in hardware) *
--------------------------------------------
RSM STATUS: 0x7c000000
-> used: 0x1f
->dirty: 0x00
->badck: 0x00
-> prog: DONE
->count: 0
--------------------------------------------
BUNDLE IFHANDLE: 0
TUNNEL IFHANDLE: 0
L2 ENCAP: 3
============================================
General 16 bytes:
------------------------
IFHANDLE: 0x12800a
STATUS: 1
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
84 OL-30353-01
Troubleshooting Commands
show uidb data

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English