Cisco XR 12000 User Manual

Table 25: show system verify Field Descriptions
DescriptionField
Type of memoryType
Initial usage determined when the command is run
with the start keyword
Initial
Current usageCurrent
Memory used for applicationsApplication
Memory available for applicationsAvailable
Total physical memoryPhysical
Devices in the system such as linecards, route
processors, fabric cards, and so forth
nodes
Number of blocked processes on the routerblocked processes
Number of aborted processes on the routeraborted processes
Number of crashed processes on the routercrashed processes
Linecard statusLC Status on Router
Internal communications protocol statusQNET Status on router
Internal communications protocol statusGSP Fabric Status on router
Internal communications protocol statusGSP Ethernet Status on router
Packet-over-SONET statusPOS Interface Status on router
Protocol on the interfaceProtocol
IP Address of the interfaceIP address
Encapsulation method used on the interfaceEncapsulation
Maximum Transmission Units for the interfaceMTU
Keep alives messages on the interfaceKeep alive
Total number packets input to the interfacePackets Input
Total number of bytes input to the interfaceBytes Input
Total number of packets output by the interfacePackets Output
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
OL-30353-01 129
Tech-Support Commands
show system verify

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English