(Optional) Specifies that the command output is displayed one page at a time.
Use the return key to display the next line of output or use the space bar to
display the next page of information. If not used, the output scrolls (that is, it
does not stop for page breaks).
Press the Ctrl+C keys to stop the command output.
page
(Optional) Specifies the tunnel number that is used by the RSVP process.tunnel-number
(Optional) Number for the tunnel. The range is from 0 to 65535.
number
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Tip
This command generates MPLS-TE information that can be useful for Cisco Technical Support representatives
when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on
page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.Note
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
OperationsTask ID
readcisco-support
readmpls-te
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
264 OL-30353-01
Tech-Support Commands
show tech-support mpls traffic-eng
To Next Page
Loading...
Need help?
General
