1
2
M
III
113
To recall a memorised driving
position
Vehicle stationary, ignition
switched on or engine running
- Press briefly on button 1 or 2 to
recall the corresponding pre-set
position.
Note : after five consecutive re-
calls of a pre-set position, the
function will be deactivated until
the engine is started.
Vehicle in motion
- Keep button 1 or 2 pressed to
recall the corresponding pre-set
position.
Memorisation of driving
positions
You can pre-set two driving posi-
tions via the buttons located on
the side of the seat.
Memorising a driving
position
To pre-set a driving position :
- With the ignition on, adjust your
seat and your rear view mirrors.
- Press on button M then imme-
diately on button 1 «first driving
position » or button 2 «second
driving position ».
The memorisation will be con-
firmed by a sound signal. Memo-
risation of a new position cancels
the previous one.
Do not attempt to pre-set a driving position while
the vehicle is moving.
DRIVER’S SEAT
To Next Page
Loading...
Need help?
General
