–
+
66
II
- The flashing of the warning lamp for the position requested signals that this position is not yet obtained.
- If the warning lamp is on fixed, the position is confirmed.
- Display of a dash in the rev counter indicates a malfunction. Urgently contact a CITROËN dealer.
Lighting of the SERVICE warning lamp accompanied by a message and a sound signal indicates a functioning
anomaly. In this case :
- a marked snatching may be felt when selecting R for reverse gear,
- the gearbox is locked on a gear,
- do not exceed 100 km/h (approx. 60 mph).
Urgently contact a CITROËN dealer.
Sequential mode
with manual gear
changing
Position of the selector for manual
gear changing.
- Move the selector to position M.
- Pull the lever « + » to change up
a gear.
- Pull the lever « - » to change
down a gear.
AUTOMATIC GEARBOX - SEQUENTIAL MODE
Observations :
- If the vehicle stops or reduces
speed (for example when ap-
proaching a stop sign), the gear-
box changes down automatically
to first gear.
- In sequential mode, it is not
necessary to release the accel-
erator during gear changes.
- A request to change gear is ac-
cepted only if the engine speed
permits it.
- For safety reasons, depending
on the engine speed, a change
up or down may be performed
automatically.
- It is possible at any time to move
from position D (driving in auto-
matic mode) to position M (driv-
ing in sequential mode) or vice
versa.
To Next Page
Loading...
Need help?
General
