WHAT DOES THE AUDIO SYSTEM COM-
Your audio system uses 5 sources:
Audio/video auxiliary input,
CD changer (according to equipment)
It is necessary to activate the audio/video auxiliary input before using this. See “Confi guration”.
The CD player of your NaviDrive allows you:
to play back the start of each album,
to display information about the CD (artist,
name of the album, etc.) provided the CD
is compatible with CD Textformat.
Jukebox source lets you copy and store
around 140 CDs or 14 CD MP3 (depending
on the compression rate).
10 Goes on the hard disc of your NaviDrive
are reserved for Jukebox source.
When you copy a CD MP3, Jukebox source
deletes all the levels of covers, retaining
Copying from Jukebox source to a CD is
Playlist is a function available in Jukebox
source. It lets you read a selection of titles
recorded in different albums or directories
Jukebox source can contain a maximum
The radio of your NaviDrive system allows you:
to listen to radio stations on waveband AM
to search for the strongest reception pos-
sible thanks to the RDS system,
to obtain traffi c information (TA) over a
to select radio stations according to your
choice of programme type (PTY).
4- THE AUDIO/VIDEO AUXILIARY INPUT
The auxiliary input allows you to connect a
nomad audio/video device directly to your
NaviDrive. You connect your nomad audio
device using the red connector
video device using the red connector
(See video chapter for functioning)
5- THE CD CH A N G ER SOURCE