ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
106
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [-]
Default value -
Step -
Comm object 24373 Related applications
Description
IP address of gateway for IB-Lite.
IBLite GateIP
6 back to List of setpoints
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [DISABLED, ENABLED]
Default value -
Step -
Comm object 24259 Related applications
Description
Dynamic Host Configuration Protocol for IP address setting can be used or blocked.
DISABLED
Block the function of DHCP, this option is worth, if you wanna adjust stable IP address
e.g. for Web Server connection or InteliMonitor PC tool.
Note: Can occured collision of IP addresses in local network with devices as printer,
router etc.!
ENABLED
Dynamically change IP address of the controller after each switch on of the controller. IP
address collision protection. Default state.
IBLite DHCP
6 back to List of setpoints
Setpoint group
Communication
Settings
Related FW 2.5.0
Range [units] [-]
Default value -
Step
Comm object 24374 Related applications
Description
This sepoint is for adjustment of port for ComAp communication over IB-Lite or IL-NT GPRS module.
Standard ComAp port is 23, what is default value of this setpoint.
ComAp Port
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English