ID-FLX Lite & Telecom Global Guide
186
Related FW 2.5.0 Related applications
Comm object 184
Description
Binary input has no function. Use this option when binary input is not connected.
Not used
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 172
Description
Binary input is used for external request for engine run in AUT mode only.
Rem start/stop
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 40
Description
If the input is opened, shut down is immediately activated. Input is inverted (normally closed) in default
configuration.
Note: In case of controller hardware or software fail, safe stop of the engine doesn’t have to be ensured.
To back-up the Emergency stop function it is recommended to connect separate circuit for disconnection
of Fuel solenoid and Starter signals.
Emergency stop
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 44
Description
If the input is closed all alarms are disabled except the binary input Emergency stop and "engine overspeed
protection".
All ID-Lite alarms are detected,
ID-Lite front panel RED LED blinks or lights,
Alarm is recorded on the ID-Lite alarm list screen,
BUT engine remains running.
Note: Warning SprinklActive is indicated in the Alarm list if sprinkler mode active to inform the operator
that the engine is not protected.
Sprinkler
6 back to List of LBI
To Next Page
Loading...
Need help?
General
