ID-FLX Lite & Telecom Global Guide
187
Related FW 2.5.0 Related applications
Comm object 149
Description
If the input is closed, no setpoints can be adjusted from controller front panel and engine mode (OFF-MAN-
AUT) cannot be changed.
Note: Access lock does not protect setpoints and mode changing from LiteEdit . To avoid unqualified
changes the selected setpoints can be password protected.
Access lock
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 185
Description
If closed, ID-Lite is switched to OFF mode (there are three modes OFF-MAN-AUT). When opens controller
is switched back to previous mode.
Note: This binary input should be connected to schedule timer switch, to avoid start of engine.
Remote OFF
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 186
Description
If the input is active, MAN mode is forced to the controller independently on the position of the MODE
selector.
Remote MAN
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 187
Description
If the input is active, AUT mode is forced to the controller independently on the position of the MODE
selector. If another of remote inputs is active, then the Remote AUT input has the lowest priority.
Remote AUT
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 198
Description
If the input is active, setpoints writing or command sending from the external terminal is disabled.
RemControlLock
6 back to List of LBI
To Next Page
Loading...
Need help?
General
