ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
188
Related FW 2.5.0 Related applications
Comm object 45
Description
If the input is activated the controller behaves like when switched to OFF mode and opens all binary outputs.
There is one exception – Stop solenoid doesn’t activate on this transition.
Detection of running engine and subsequent alarm message "Sd Stop fail" is blocked.
The controller shows “Emerg Man” state and the engine can not be started.
After the input is open again, the controller recovers to previous state and behaves according to the actual
situation.
Function is active in any controller mode.
Emerg. manual
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 189
Description
Binary input has the same function as Start button on the ID-Lite front panel. It is active in MAN mode only.
StartButton
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 190
Description
Binary input has the same function as Stop button on the ID-Lite front panel. It is active in MAN mode only.
StopButton
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 191
Description
Binary input has the same function as Fault reset button on the ID-Lite front panel.
FaultResButton
6 back to List of LBI
Related FW 2.5.0 Related applications
Comm object 192
Description
Binary input has the same function as Horn reset button on the ID-Lite front panel.
HornResButton
6 back to List of LBI

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English