InteliLite Global Guide
45
5.2 Controller configuration and PC tools
connection
5.2.1 USB 45
5.2.2 RS232 46
5.2.3 Ethernet 47
6 back to Controller setup
This chapter contains brief introduction into the specifics of firmware and archive upload and connection of
various PC tools to the controller. If you require detailed information on each PC tool please use the included
Help in those PC tools or download their Reference Guides.
5.2.1 USB
You may connect to the controller using the USB port. In this case standard USB A to B cable should be used.
Connection using LiteEdit2015
Image 5.1 First screen of LiteEdit2015 - select connect to controller
Image 5.2 Second screen of LiteEdit - select detected controllers
To Next Page
Loading...
Need help?
General
