ComAp InteliLite MRS16 User Manual

InteliLite Global Guide
89
Record structure
Name Abbreviation Description
Number No.
Row number (0 corresponds to the last record, -1 to the previous
one, etc.)
Reason Reason Reason for history record (any event or alarm related to the gen-set
Time Time Time
Date Date Date
RPM RPM Engine rotations per minute
Power Pwr Generator active power
Reactive power Q Generator reactive power
Power Factor PF Generator power factor
Load Character LChr Generator load character
Generator
Frequency
Gfrq Generator Frequency
Generator Voltage Vg1 Generator voltage Ph1
Generator Voltage Vg2 Generator voltage Ph2
Generator Voltage Vg3 Generator voltage Ph3
Generator Voltage Vg12 Generator voltage Ph12
Generator Voltage Vg23 Generator voltage Ph23
Generator Voltage Vg31 Generator voltage Ph31
Generator Current Ig1 Generator current Ph1
Generator Current Ig2 Generator current Ph2
Generator Current Ig3 Generator current Ph3
Voltage Battery VBat Voltage of battery
Analog Input 1 Ain1 Analog input 1
Analog Input 2 Ain2 Analog input 2
Analog Input 3 Ain3 Analog input 3
Analog Input 4 Ain4 Analog input 4
Binary Inputs BIN Controller binary inputs
Binary Outputs BOUT Controller binary outputs
Controller Mode Mode Controller mode
Note: When some setpoint is changed, in history log is written its number of communication object.
5.4.10 Breaker control
The following power switches are controlled by the controller:
The generator circuit breaker or contactor – GCB
It is possible to use either a motorized circuit breaker or contactor. Below is a list of available control outputs
that should fit all types of contactors or breakers. The following rules must be kept to when designing the wiring
of power switches:

ComAp InteliLite MRS16 Specifications

General

Brand	ComAp
Model	InteliLite MRS16
Category	Controller
Language	English