InteliLite Global Guide
8
Note: The controller contains a large number of configurable setpoints, because of this it is impossible to
describe all of its functions. Some functions can be changed or have different behavior in different SW versions.
Always check the Global guide and New feature list for SW version which is used in controller. This manual
only describes the product and is not guaranteed to be set for your application.
IMPORTANT: Be aware that the binary outputs can change state during and after software
reprogramming (before the controller is used again ensure that the proper configuration and
setpoint settings are set in the controller).
The following instructions are for qualified personnel only. To avoid personal injury do not perform any action not
specified in related guides for product.
1.5 Certifications and standards
Certificates and standards
EN 61000-6-2
EN 61000-6-4
EN 61010-1
EN 61000-2-1 (-20 °C/16 h for std, -40 °C/16 h for LT version)
EN 61000-2-2 (70 °C/16 h)
EN 61000-2-6 (2÷25 Hz / ±1,6 mm; 25÷100 Hz / 4,0 g)
EN 61000-2-27 (a=500 m/s
2
; T=6 ms)
EN 61000-2-30
EN 60529 (front panel IP65, back side IP20)
1.6 Document history
Revision number Related sw. version Date Author
4 1.2.1 5.12.2016 Michal Slavata
3 1.1.0 23.5.2016 Michal Slavata
2 1.1.0 6.3.2016 Michal Slavata
1 1.0.0 15.7.2016 Michal Slavata
To Next Page
Loading...
Need help?
General
