D-Link DWL-2600AP Administrator's Guide

Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 114
January 2015
Appendix A - Default AP Settings
Feature Default
VLAN ID 1
Network Name (SSID) dlink1 through dlink16
Broadcast SSID Allow
Security Mode None (plain text)
MAC Authentication Type None
RADIUS IP Address 10.90.90.1
RADIUS Key secret
RADIUS Accounting Disabled
Redirect Mode None
Other Default Settings
WDS Settings None
STP Disabled
MAC Authentication No stations in list
Load Balancing Disabled
SNMP Enabled
RO SNMP Community Name public
SNMP Agent Port 161
SNMP Set Requests Enabled
Managed AP Mode Enabled
Authentication (802.1X Supplicant) Disabled
Management ACL Disabled
HTTP Access Enabled; disabled in Managed Mode
HTTPS Access Enabled; disabled in Managed Mode
Console Port Access Enabled
Telnet Access Enabled; disabled in Managed Mode
SSH Access Enabled; disabled in Managed Mode
WMM Enabled
Email Alert Admin Mode Down
Time Manual (Not set)
Client QoS Global Admin Mode Disabled
Per-VAP Client QoS Mode Disabled
Clustering Stopped
Table 66 - UAP Default Settings

D-Link DWL-2600AP Specifications

General

Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	Yes
LED indicators	Power, Stand-by, Status, WAN, WLAN
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Security algorithms	WEP, WPA, WPA2
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Width	160 mm
Height	45 mm
Weight	240 g
Dimensions (WxDxH)	160 x 160 x 45 mm