Dahua N42C3P User Manual

User's Manual
84
We recommend this method when you want to add only a few remote devices and know
their IP addresses, usernames and passwords.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Camera List.
Step 2 (Optional) Enable H.265 Auto Switch.
When H.265 Auto Switch is enabled, the video compression standard of added
remote devices is switched to H.265 automatically.
Step 3 Click Manual Add.
Figure 5-56 Manual add
Step 4 Configure the parameters.
The parameters might vary depending on the manufacturer that you select.
Table 5-15 Remote channel parameters
Parameter
Description
Channel
Select the channel that you want use on the Device to
connect the remote device.
Manufacturer
Select the manufacturer of the remote device.
IP Address
Enter the IP address of the remote device.

Dahua N42C3P Specifications

General

Model	N42C3P
Video Compression	H.265; H.264
Ethernet	RJ-45 (10/100 Base-T)
Protocols	TCP; UDP; ARP; RTP; RTSP; SMTP; FTP; DHCP; DNS; DDNS; NTP
Power Supply	12V DC
Network Interface	RJ-45 (10/100 Base-T)

Summary

3 Device Installation

4 Starting the Device

5 Local Operations

5.1 Initialization

Guides through the initial setup process, including password and region settings.

5.8 Recording Management

Manages recording schedules, search, playback, and backup of video files.

5.9 Analytics+

Configuration and management of intelligent video analytics features.

5.10 Alarm Settings

Configures various alarm types, inputs, outputs, and video detection settings.

5.11 Network

Sets up network parameters for device connectivity and communication.

5.12 Storage

Manages storage resources, including HDD setup, disk checks, and capacity calculation.

5.13 Account

5.14 Security

5.15 System

8 FAQ

Appendix 5 Cybersecurity Recommendations