Dahua N42C3P User Manual

User's Manual
233
Parameter
Description
Server Address
●
For Dyndns DDNS, the default address is members.dyndns.org.
●
For NO-IP DDNS, the default address is dynupdate.no-ip.com.
●
For CN99 DDNS, the default address is members.3322.org.
Domain Name
Enter the domain name that you have registered on the website of
DDNS service provider.
Username
Enter the username and password obtained from DDNS service
provider. You need to register the username, password and other
information on the website of DDNS service provider.
Password
Interval
Enter the interval at which you want to update the DDNS.
Step 3 Click Apply.
Enter the domain name in the browser on your computer, and then press the Enter
key. If the web interface of the Device is displayed, the configuration is successful. If
not, the configuration failed.
5.11.11 UPnP
You can map the relationship between the LAN and the WAN to access the Device on the
LAN through the IP address on the WAN.
5.11.11.1 Configuring Router
Procedure
Step 1 Log in to the router to set the WAN port to enable the IP address to connect into
the WAN.
Step 2 Enable the UPnP function on the router.
Step 3 Connect the Device with the LAN port on the router to connect into the LAN.
Step 4 Select Main Menu > NETWORK > TCP/IP, configure the IP address into the router IP
address range, or enable the DHCP function to obtain an IP address automatically.
5.11.11.2 Configuring UPnP
Procedure
Step 1 Select Main Menu > NETWORK > UPnP.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English