User's Manual
173
and non-motor vehicle. Once a target is detected, an alarm is triggered.
5.9.8.1 Enabling Smart Plan
To use Analytics+ by camera, you need to enable the smart plan first. For details, see "5.9.2
Smart Plan".
5.9.8.2 Configuring Video Metadata
When a metadata alarm is triggered, the system links the corresponding camera to record
videos and logs and take snapshots. Other alarm linkage actions are not supported for video
metadata.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > Video Metadata.
Figure 5-139 Video metadata
Step 2 Select a channel and Analytics+ type.
To Next Page
Loading...
Need help?
General
