Dahua N42C3P User Manual

User's Manual
263
Figure 5-222 iSCSI
Step 2 Set parameters.
Table 5-68 iSCSI parameters
Parameter
Description
Server Address
Enter the server address of iSCSI server.
Port
Enter the port of iSCSI server, and the default value is 3260.
Storage Path
Click Storage Path to select a remote storage path.
Each path represents an iSCSI shared disk and these paths are
generated when created on the server
Username,
Password
Enter the username and password of iSCSI server.
If anonymous login is supported by iSCSI server, you can enable
Anonymous to log in as an anonymous user.
Step 3 Click Apply.
5.13 Account
You can manage users, user group and ONVIF user, and set admin security questions.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English