Dahua N42C3P User Manual

User's Manual
64
●
The functions with buttons in gray are not supported by the system.
●
Right-click once to return to the interface of PTZ basic control panel.
Table 5-13 PTZ functions
Icon
Function
Icon
Function
Preset
Pan
Tour
Flip
Pattern
Reset
Scan
Click the AUX Config icon to open
the PTZ functions settings
interface.
AUX Switch
Click the Enter Menu icon to open
the PTZ Menu interface.
5.6.7.3 Configuring PTZ Functions
5.6.7.3.1 Configuring Presets
Procedure
Step 1 On the expanded PTZ control panel, click .
Figure 5-35 Preset
Step 2 Click the direction arrows to the required position.
Step 3 In the Preset box, enter the value to represent the required position.
Step 4 Click Setting to complete the preset settings.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English