Dahua N42C3P User Manual

User's Manual
188
Step 2 Select a channel and then click Add.
Step 3 Select the Enable checkbox and then set Type to In Area No.
Step 4 Draw people counting rule.
1) Click to draw a rule. Right-click the image to stop drawing.
2) Configure the parameters.
3) Click OK.
Step 5 Click and then enable in-area people number alarm and stay alarm.
Step 6 Click under Trigger to configure the alarm schedule and linkage
Step 7 Click Apply.
5.9.11.4 Queuing
Background Information
After configuring queuing alarm, the system can realize the corresponding linkage actions
once the number of people in the queue or the waiting time has triggered an alarm.
Procedure
Step 1 Select Main Menu > Analytics+ > Parameters > People Counting > Queuing.
Figure 5-153 Queuing
Step 2 Select a channel, and then click Add.
Step 3 Select the Enable checkbox.
Step 4 Click to draw queuing rule and area.
Step 5 Click under Parameters, and then enable Queue People No. Alarm or Queue
Time Alarm.
Step 6 Click under Trigger to configure alarm schedule and linkage.
Step 7 Click Apply.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English