Dahua N42C3P User Manual

User's Manual
268
Figure 5-227 Change password
Step 3 Click to enable the Modify Password function.
Step 4 Enter old password and then enter new password twice.
●
The password must consist of 8–32 non-blank characters and contain at least
two types of the following characters: uppercase, lowercase, numbers, and
special characters (excluding ' " ; : &).
●
For your device security, create a strong password.
●
Check the box to enable Unlock Pattern function, click .
Step 5 Click to enable Unlock Pattern and then click to draw the pattern.
Step 6 Click OK.
5.13.3 Resetting Password
You can reset the password when you forget the password.
5.13.3.1 Enabling Password Reset
Background Information
Enable the password reset function and configure the linked email address and security
questions that are used to reset the password.
Procedure
Step 1 Select Main Menu > ACCOUNT > Password Reset.
Step 2 Click to enable the password reset function.

Dahua N42C3P Specifications

General

Brand	Dahua
Model	N42C3P
Category	Network Hardware
Language	English