Indoor Unit Control (RA Models) SiBE18-821_C
118 Function
7.14.7 Auto-restart Function
Even if a power failure (including one for just a moment) occurs during the operation, the
operation restarts automatically when the power is restored in the same condition as before the
power failure.
Note: It takes 3 minutes to restart the operation because the 3-minute standby function is activated.
7.14.8 WEEKLY TIMER Operation
Up to 4 timer settings can be saved for each day of the week (up to 28 settings in total). Those 3
items of “ON/OFF”, “temperature” and “time” can be set.
Refer to “WEEKLY TIMER Operation” on the following pages for detail.
Wall mounted type J-series: page 185
Wall mounted type G-series, Floor standing type: page 221
To Next Page
Loading...
Need help?
General
