SiBE18-821_C SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
Operation Manual 287
30 English
Operational Details and Functions
There are two types of airflow direction setting.
Airflow direction swing Airflow direction
Indoor unit
(Automatic) (Automatic)
Indoor unit
(Desired position) (Desired position)
Movement of airflow direction blades
Menu Manipulation
The airflow direction blades automatically
swing up and down.
You can select from one of five fixed
directions. (This has no relation to the
angle of the louvers.)
Under the operation conditions shown below, airflow direction is controlled automatically. Actual
operation may thus be different than what is displayed on the remote controller.
Heating mode includes automatic operation.
• Room temperature is higher than the remote controller’s set temperature
(in heating mode).
• When defrosting (in heating mode).
(The airflow is blowing horizontally so that people in the room are not in
direct line of the cold air.)
• Under continuous operation with the airflow blowing horizontally.
Operation
condition
To Next Page
Loading...
Need help?
General
