SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series SiBE18-821_C
276 Operation Manual
English 19
Operation Contents
Program Dry
Program Dry Operation
Home Leave
Operation Method
The home leave can not be enabled when a centralized control is connected.
1
ON
FLASHING
OFF
The Program dry function of the system repeats the weak cooling
operation of the system intermittently to dehumidify the room without
dropping the room temperature as much as possible for the
prevention of excessive cooling.
• The microcomputer is in automatic temperature and fan speed control. Therefore, temperature
or fan speed settings cannot be made or changed while the air conditioner is in operation.
Home Leave is a feature that enables to keep the room temperature above 10°C when the
occupants are out.
•
Press and hold the “ ” or “ ”
button for at least four seconds.
(During backlight lit)
•
The Home Leave icon displays and
function is enabled.
•
To cancel the home leave mode, continue
pressing Menu/Enter button for at least
four seconds. (During backlight lit)
The Home Leave icon shows the status
of the home leave function.
Note
• This function will switch on heating if the installation is switched off.
• For the setting, please contact your local dealer.
Home leave is enabled
Home leave is active
Home leave is disabled
To Next Page
Loading...
Need help?
General
