DataCard CR805 Installation And Administrator's Guide

CR805 Retransfer Card Printer Instrallation and Administrator’s Guide A-11
8. Connect the interconnect cable from the
laminator to the data port on the printer.
Connect the Power Cords
1. Connect the printer power cord to the printer
and plug the power supply cord into the power
outlet.
2. Connect the laminator power cord to the
laminator and to the power supply. Plug the
power supply cord into the power outlet.
Data Port
Interconnect
Cable

DataCard CR805 Specifications

General

Brand	DataCard
Model	CR805
Category	Printer
Language	English