CR805 Retransfer Card Printer Installation and Administrator’s Guide 37
Test the IP Address Using a Local Network
You can set up a local network consisting of the printer and a computer. This allows you to test
whether the printer and computer can communicate using the static IP address, and to test that
the printer is functioning correctly. You might use this procedure if you set up multiple printers in
a central location before installing them at individual sites.
The following procedure demonstrates testing a static IPv4 address.
1. Connect the printer directly to a computer using an Ethernet cable.
2. Open the Windows Network and Sharing Center and select Local Area Connection.
3. Click Properties on the Local Area Connection Status menu.
This procedure is optional.
You also can use this procedure to connect a printer to a computer using an
Ethernet cable if the USB port on the printer is unavailable.
To Next Page
Loading...
Need help?
General
