DataCard CR805 Installation And Administrator's Guide

CR805 Retransfer Card Printer Installation and Administrator’s Guide 1
Chapter 1: Printer Installation
This chapter describes system requirements and provides setup
instructions for the Entrust Datacard™ CR805™ Retransfer Card Printer.
Your installation may have additional requirements for a card production environment. Consult
your system administrator to determine the optimum location for card production.
PC Requirements
Use a PC that meets or exceeds the following:
 A 32- or 64-bit processor, running at 2 GHz or faster
 4 GB or more memory (RAM) and at least 1 GB free space on the hard drive
 One of the following operating systems:
 Windows 10, 32- or 64-bit
 Windows 8.1, 32- or 64-bit
 Windows 7, 32- or 64-bit
 Windows Server 2012, R2, 64-bit
 Windows Server 2008, 64-bit
 A USB 2.0 or an Ethernet network connection. The printer can use only one connection type
at the same time.
 ID software or other software to capture and organize the data to print on each card.
For Card Printer Driver installation troubleshooting and card production
troubleshooting information, refer to your printer’s Driver Guide and User’s Guide.

DataCard CR805 Specifications

General

Brand	DataCard
Model	CR805
Category	Printer
Language	English