Loading Print Media 231
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section15.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
OR
NOTICE: Never use envelopes with windows, coated linings, or self-stick
adhesives. These lead to paper jams and can cause damage to the printer.
NOTE: Ensure that you load an envelope with the flap completely opened.
NOTE: Insert an envelope with the flap side face up and with the stamp area on
the bottom right side.
Using the SSF
• Load only one size and type of print media during a single print job.
• To achieve the best possible print quality, use only high-quality print media
that is designed for use in laser printer. For more guidelines on print media,
see "Print Media Guidelines."
• Do not add or remove print media when the printer is printing from the SSF.
This may result in a paper jam.
• Print media should be loaded with the recommended print side down and the
top of the print media going into the SSF first.
• Do not place objects on the SSF. Also, avoid pressing down or apply
excessive force on it.
• The icons on the SSF show how to load the SSF with paper, and how to turn
an envelope for printing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
