Setting the IP Address 85
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section08.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
10
Use and buttons to enter the first octet of the IP address, and then
press button.
The cursor moves to the next digit.
NOTE: You can only enter one octet at a time and must press
button
after entering each octet.
11
Enter the rest of the octets, and then press the
(Set)
button.
12
Press and buttons until
Subnet Mask
appears, and then press the
(Set)
button.
13
Repeat steps 10 and 11 to set Subnet Mask, and then press the
(Set)
button.
14
Press and buttons until
Gateway Address
appears, and then
press the
(Set)
button.
15
Repeat steps 10 and 11 to set the Gateway Address, and then press the
(Set)
button.
16
Turn off the printer, and then turn it on again.
When Using the Tool Box
NOTE:
1
Click
Start
All Programs
Dell Printers
Dell 2150 Color Printer
Tool Box
.
NOTE: The Select Printer window appears in this step when multiple
printer drivers are installed on your computer. In this case, click the name of
this printer listed in Printer Names, and then click OK.
The
Tool Box
opens.
2
Click the
Printer Maintenance
tab.
3
Select
TCP/IP Settings
from the list at the left side of the page.
The
TCP/IP Settings
page appears.
4
Select the mode from
IP Address Mode
, and then enter the values in IP
Address, Subnet Mask, and Gateway Address.
5
Press the
Apply New Settings
button to take effect.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
