Dell 2150cn - The Output Is too Light

Troubleshooting Guide 435
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section28.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
• Auger mark
• Wrinkled/Stained paper
• Damage on the leading edge of paper
The output is too light
Action Yes No
1 The toner cartridges may be low or need to be
replaced. Confirm the amount of toner left in
each toner cartridge.
a Check the toner level in the Status tab in the
Status Monitor.
b Replace the toner cartridges as necessary.
Does this solve your problem?
The task is
complete.
Go to action 2.
2 If you are using non-Dell brand toner cartridges,
disable the Non-Dell Toner option.
a Launch the Tool Box, and click Non-Dell
Tone r
on the Printer Maintenance tab.
b Ensure that the On check box is not selected.
Does this solve your problem?
The task is
complete.
Go to action 3.
3 Disable the Toner Saving Mode in the printer
driver.
a On the Advanced tab, ensure that the Tone r
Saving Mode check box is not selected.
Does this solve your problem?
The task is
complete.
Go to action 4.