314 Understanding the Printer Menus
Manual Color Registration Adjustments are required when the printer is initially
installed and after the printer is moved.
NOTE: The Color Reg Adjust feature can be configured when Auto
Reg Adjust
is set to Off.
Values:
NOTE: Ensure that you remove the paper from the single sheet feeder before
performing Auto Correct.
Clean Developer
Purpose:
To stir the toner in a new toner cartridge.
Values:
Auto Correct Are You Sure? Press the
(Set)
button to
automatically
perform color registration correction.
ColorReg
Chart
Are You Sure? Press the
(Set)
button
to print a color
registration chart. The color registration chart
prints a lattice pattern of yellow, magenta, and
cyan lines. On the chart, find the values on the
right side that are next to the line that is
perfectly straight for each of the three colors. If
the value for the this line is 0, color registration
adjustment is not required. If the value for this
line is any value other than 0, specify the
adjustment values.
Enter Number Enter (LY,
LM, LC)
-9 to +9 Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction)
color adjustment values individually for
Yellow, Magenta, and Cyan. Enter a number in
order of lateral adjustment (left), lateral
adjustment (right), and process adjustment.
Press the
(Set)
button to save all the settings.
Enter (RY,
RM, RC)
-9 to +9
Enter (PY,
PM, PC)
-9 to +9
Are You Sure? Press the
(Set)
button to
stir the toner in a new toner cartridge.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
