Dell EMC PowerStore T User Manual

Summary of tasks for installing an expansion enclosure
To install an expansion enclosure, complete the tasks below in the order in which they appear. This document provides instructions for
completing each task.
1. Verify the contents of the shipping package.
2. Choose the space in the cabinet for the new expansion enclosure.
3. Remove the filler panels that cover the cabinet space for the new expansion enclosure.
4. Install the rails for the new expansion enclosure in the cabinet.
5. Install the expansion enclosure on the rails.
6. If the new expansion enclosure shipped without its drives installed, install the drives in the expansion enclosure.
7. Install the front bezel on the new expansion enclosure.
8. Attach the expansion (back-end) cables to the new expansion enclosure.
9. Attach the power cables to the new expansion enclosure.
10. Verify the operation of the new expansion enclosure.
Verify shipping package contents
Confirm that you received all the equipment that is required to install the new 25-drive expansion enclosure.
Verify that you received the following:
Component Quantity
Expansion enclosure (25-drive) 1
Rail kit, including
Snap-in rails (2)
Screws (3 per rail)
CL5583
1
Power cords (2), either
Black and gray C13/C14
Black and gray C13/C20
2
Bezel for expansion enclosure
(with key)
1
Mini-SAS HD cables (1 m or 2
m copper) to loop back the last
expansion enclosure to the
node
2
Install a new base enclosure and optional expansion enclosure 13

Dell EMC PowerStore T Specifications

General

Brand	Dell
Model	EMC PowerStore T
Category	Storage
Language	English