Dell EMC PowerStore T User Manual

Transfer the internal battery backup module
Transfer the internal battery backup module from the faulted node to the replacement node.
Remove the internal battery backup module
Steps
1. Lift the gray padding away from the internal battery backup module.
2. Remove the clip around the internal battery backup module by pulling the tab on the left side.
3. Disconnect the internal battery backup module cable from the motherboard.
Figure 109. Releasing the BBU
4. Lift the internal battery backup module away from the motherboard.
Figure 110. Removing the BBU from the motherboard
Install the internal battery backup module
Install the internal battery backup module into the replacement node.
Steps
1. Place the internal battery backup module into position on the motherboard.
78
Base enclosure service procedures

Dell EMC PowerStore T Specifications

General

Brand	Dell
Model	EMC PowerStore T
Category	Storage
Language	English