Dell EMC PowerStore T User Manual

Figure 40. Releasing the lever on the embedded module
3. Pull the release lever away from the system. The embedded module releases from the system as you pull the lever.
Figure 41. Removing the embedded module from the system
4. Remove the embedded module from the slot.
Remove a 4-port card
Steps
1. Remove the SFPs from the front of the embedded module.
2. Push down the two blue tabs on the back of the 4-port card to release the 4-port card.
42
Base enclosure service procedures

Dell EMC PowerStore T Specifications

General

Brand	Dell
Model	EMC PowerStore T
Category	Storage
Language	English