Eaton CF1200 User Manual

41INSTALLATION AND OPERATION MANUAL 25-16327-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Mute buzzer
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and
enter the passcode.
Enter the Supervisor Mode and Select “Mute Buzzer” from the Top Menu.
Reset
Enter the Supervisor Mode and Select “Reset” from the top Menu. Select “Yes” to
reset the panel.
Evacuate
Silence
Alarms
Reset
Supervisor
FRE off
Others
View Log
Check Config.
Print
Lamp Test
View Fires
AC = 19
View Pre
Alarms
View
Disabled
View
Faults
Weekly Test
Enable/Disable
Mute
Buzzer
Evacuate
Silence
Alarms
Faults = Short circuits, broken detectors etc.
To remove faults from this list:
1) Fix Fault
2) Reset Panel
Mute
Buzzer
Others
View Fires
AC = 19
View Pre
Alarms
View
Disabled
View
Faults
Reset
001 14:22:49
Mains Failure
Supervisor
FRE off
Supervisor
FRE off
This will Reset the Panel
Do you wish to continue?
Yes
No

Eaton CF1200 Specifications

General

Brand	Eaton
Model	CF1200
Category	Fire Alarms
Language	English