Eaton CF1200 User Manual

63INSTALLATION AND OPERATION MANUAL 25-16327-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Programming I/O and sounders T1/T2
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen.
Then press T1/T2
Service
FRE off
Commission
Test
Configure
Reset
Exit
Mute
Buzzer
Service
FRE off
Reset
Exit
Exit
Change Date/Time
Change Text
Configure Zones
Change Passcode
Italian Mode
Service
FRE off
Reset
Mute
Buzzer
Programming I/O
and Sounders
Add/Delete
Configure Heat Detectors
Network
Language
Day/Night
Network Protocol
Auxillary Board
FRE impedance band
HMO
Sounder tone
Sound Settings
T1/T2
Alarm Verification Feature
FRE double-knock Override
Select “Programming
I/O and Sounders”
from the congure
menu screen.

Eaton CF1200 Specifications

General

Brand	Eaton
Model	CF1200
Category	Fire Alarms
Language	English