Eaton CF1200 User Manual

66 INSTALLATION AND OPERATION MANUAL 25-16327-B November 2020 www.eaton.com
Section 3: Panel controls & indicators
Programming I/O and sounders alarm verification
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
Enter the Service Mode and Select Configure.
Service
FRE Off
Service
FRE off
Service
FRE off
Service
FRE off
Alarm Verification Feature
Programming I/O
and Sounders
Exit
Commission
Test
Enable/Disable Address
Mute
Buzzer
Mute
Buzzer
Reset
Configure
Exit
Exit
AVF On/Off
AVF length
AVF Zones
Reset
Exit
Panel Outputs
Auxillary Board
HMO
Sounder tone
FRE double-knock override
T1/T2
Reset
Add/Delete
Change Date/Time
Change Text
Configure Zone
Change Pascode
Day/Night
Language
Network
Configure Heat Detectors
Reset
Select “Programming
I/O and Sounders”
from the Configure
Menu Screen. Then
press Alarm Verification

Eaton CF1200 Specifications

General

Brand	Eaton
Model	CF1200
Category	Fire Alarms
Language	English