User manual SEFELEC 5x Series 29 v1.06
SAFETY
SECURITY WHEN WORKING ON ELECTRICAL DEVICES
WARNING
electric shock!
•
All precautions related to the use of equipment connected to the electrical
network must be taken when using it.
• In particular, it is absolutely necessary to connect the equipment to the
ground by the power cord and via the ground pin provided for this pur-
pose on rear face of the unit (see paragraph 20.1 item Z2)
• Always be sure that the high voltage light is turned off before connecting
or disconnecting an element to be tested.
SAFETY ARRANGEMENTS
• Sectioning of the equipment by the power cord.
• The devices are equipped with a double safety loop.
WARNING
Danger of electric shock!
• To prevent access by unauthorized persons, the test area must be
secured by a safety loop.
WARNING
• The power cord is the device for sectioning the equipment. After in-
stallation, make sure that it remains accessible. In case of replace-
ment of the mains power cord, be sure to always use a mains cord
suitable for the power and CE certified.
To Next Page
Loading...
Need help?
General
