12
3.5.3 Child Lock
This segment of the lock is switched on when child lock is activated. It blinks if, with child lock activated, a
button is pressed or the rotary is turned.
Only with coin meter connected, after 5 minutes we have to disable door opening and cycle reset until the
end of cycle. The 5 minutes are counted after START command in execution or delayed state but not in
pause.
Child Lock is a function that allows the user to leave the appliance unsupervised with the door closed,
without having to worry that children might be injured by, or other persons cause damage to the appliance.
The basic points are:
all push buttons are disabled;
program cancelling after start not allowed when switching machine off and on;
door is kept closed as long as child lock is active, but not during programme setup and cycle end
phases;
a clear indication of Child Lock, such as a dedicated Icon has to be provided.
3.5.4 Delay
This icon is switched on during setup of the delay start or during delay phase after cycle start.
3.5.5 Time Digits
3 digits used to show cycle duration, errors, warnings, delay time. Please refer to their
description under “Functionalities” chapter.
3.5.6 Extra Rinse symbol
Extra Rinse has only 1 selection level. Pressing the button the option is enabled or disabled. When
the option is enabled the associated ICON switches on and cycle duration is updated in display
digits.
3.5.7 No softner symbol
If no Softener is selected, both internal drawer and external detergent system has to not use
related detergent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
