25
9 Options
9.1 Description of options
Rinse hold
During the cycle the intermediate rinses and spins are performed.
Stops the appliance with water in the tub before the final spin cycle.
To drain the water, simply press the START/PAUSE button to run the drain and spin cycles.
Pre-wash
Adds a pre-wash phase at the start of the cycle with water heating to 30 °C (or cold, if selected).
In COTTON and SYNTHETICS cycles, performs a short spin before passing on to the washing phase.
This option cannot be selected for WOOL and HAND WASH cycles.
Soak
Adds a pre-wash phase with heating to 30 °C (or cold, if selected) plus 30’ hold with HAND WASH
movement.
Completes the cycle.
Stains
Adds a 5-minute motor movement phase after heating to 40 °C.
Water flow to the pre-wash/stains compartment to introduce the special stain-removal product.
This option cannot be selected for WOOL and HAND WASH cycles.
Super rinse (key combination).
Adds two rinses in the COTTONS - SYNTHETICS - DELICATES cycles
Eliminates the spin at the end of washing.
EXTRA rinse
Adds up to five rinses in the COTTONS - SYNTHETICS - DELICATES cycles.
When the rinses are five or more, it eliminates the spins at the end of the washing.
Maximum of 8 rinses in total.
ENABLING/DISABLING EXTRA RINSE USING A COMBINATION OF KEYS
Appliances which do not envisage the option SUPER RINSE combined with a button can enable it through
a key combination.
During the selecting phase, press the two buttons shown in the figure simultaneously for a few seconds until
the related icon lights up. This option also remains enabled during subsequent cycles. To disable it, repeat
the same operation until the related icon is turned off.
No spin
It eliminates all the spin phases.
It adds three rinses to the COTTON CYCLE and one to the SYNTHETIC FABRICS cycle.
Daily
Modifies the structure of the COTTONS - SYNTHETICS - DELICATES cycles to obtain good washing
performance in a short space of time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
