Section 8: Using the Epilog Legend Systems
76
Arrows
The arrow keys are used to move through the menu selections
up, down, right, or left. The arrow keys are also used to move the
carriage when you are in the “Service”, “Move X/Move Y”
mode.
Contrast
This adjustment is located on the Keyboard panel. The display is a Liquid Crystal
Display (LCD), and for best viewing the contrast may need to be adjusted lighter or
darker. Insert a small, flat blade screwdriver into the slot just below the surface of the
keyboard, and rotate the adjuster to get the best display contrast for your work
environment.
Pointer
This is simply a visible reminder that the Laser Diode Pointer (Red Dot Pointer) is
turned on. This Laser Diode Pointer (Red Dot Pointer) is much like the hand held
laser pointers, and has a bright red beam. When this is turned on, DO NOT place
your head inside the engraving area, as you may look into the beam. For additional
information, read Section 2 “Safety” contained in this manual.
To Next Page
Loading...
Need help?
General
