Epson BrightLink 455Wi User Manual

12 Welcome
Unpacking the Mounting Hardware
After unpacking the setting plate and mounting hardware, make sure
you have all these parts:
See the Installation Guide for instructions on mounting the projector
on a wall. Save all packaging in case you need to ship the projector.
Always use the original packaging (or the equivalent) when you need
to send the projector to another location. See page 134 for
transportation instructions.
Wall mount (setting plate)
Installation template
Wall plate
Wall plate cover
End cap
Hex wrenches
Bolts

Epson BrightLink 455Wi Specifications

Projection

white light output	2500 lumens
color light output	2500 lumens
native resolution	1280 x 800 (WXGA)
throw ratio range (16:10)	0.37 – 0.50
throw ratio range (4:3)	0.44 – 0.59
throw ratio range (16:9)	0.37 – 0.50

Lamp Specifications

lamp type	E-TORL 230 W UHE
lamp life (ECO mode)	up to 3500 hours
lamp life (normal mode)	up to 2500 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	363 W
network on standby power	10 W
network off standby power	0.3 W

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	35 dB
fan noise (ECO mode)	28 dB

Weight and Dimensions

dimensions	14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate	14.1 lb
weight without slide plate	12.9 lb