Epson BrightLink 455Wi User Manual

Technical Specifications 159
Electrical
Rated frequency 50/60 Hz AC
Power supply 100 to 240 VAC
±10%, 3.4 A to 1.4 A
Power consumption
100 to 120 V 268 W in ECO mode
363 W Normal mode
0.3 W Standby (Communication Off)
10 W Standby (Communication On)
220 to 240 V 257 W in ECO mode
343 W Normal mode
0.3 W Standby (Communication Off)
12 W Standby (Communication On)
Environmental
Temperature Operating: 41 to 95 °F (5 to 35 °C)
Storage: 14 to 140 °F (–10 to 60 °C)
Humidity
(non-condensing) Operating: 20 to 80% RH
Operating altitude 0 to 7500 ft (0 to 2286 m);
over 4921 ft (1500 m), enable
High
Altitude
mode in the Extended menu
(see page 91)
Safety and Approvals
United States FCC 47CFR Part 15B Class B (DoC)
UL60950-1 Second Edition (cTUVus
Mark)
Canada ICES-003 Class B
CSA C22.2 No. 60950-1-07
Pixelworks
™
DNX
™
ICs are used in this projector.

Epson BrightLink 455Wi Specifications

Projection

white light output	2500 lumens
color light output	2500 lumens
native resolution	1280 x 800 (WXGA)
throw ratio range (16:10)	0.37 – 0.50
throw ratio range (4:3)	0.44 – 0.59
throw ratio range (16:9)	0.37 – 0.50

Lamp Specifications

lamp type	E-TORL 230 W UHE
lamp life (ECO mode)	up to 3500 hours
lamp life (normal mode)	up to 2500 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	363 W
network on standby power	10 W
network off standby power	0.3 W

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	35 dB
fan noise (ECO mode)	28 dB

Weight and Dimensions

dimensions	14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate	14.1 lb
weight without slide plate	12.9 lb