Epson BrightLink 455Wi User Manual

160 Technical Specifications
Compatible Video Formats
This projector supports the high definition video and computer
display formats listed here.
To project images output from a computer, the computer’s video card
must be set at a refresh rate (vertical frequency) that’s compatible with
the projector. Some images are automatically resized using Epson’s
SizeWize
™
technology to display in the projector’s native format. The
frequencies of some computers may not allow images to display
correctly; see your computer’s documentation for details.
Mode
Refresh
rate (Hz) Resolution
Computer signals (analog RGB)
VGA—60
VESA—72
VESA—75
VESA—85
60
72
75
85
640 × 480
640 × 480
640 × 480
640 × 480
SVGA—56
SVGA—60
SVGA—72
SVGA—75
SVGA—85
56
60
72
75
85
800 × 600
800 × 600
800 × 600
800 × 600
800 × 600
XGA—60
XGA—70
XGA—75
XGA—85
60
70
75
85
1024 × 768
1024 × 768
1024 × 768
1024 × 768
SXGA1—70
SXGA1—75
SXGA1—85
70
75
85
1152 × 864
1152 × 864
1152 × 864
WXGA—60
WXGA—75
WXGA—85
60
75
85
1280 × 800
1280 × 800
1280 × 800
SXGA2—60
SXGA2—75
SXGA2—85
60
75
85
1280 × 960
1280 × 960
1280 × 960
SXGA3—60
SXGA3—75
SXGA3—85
60
75
85
1280 × 1024
1280 × 1024
1280 × 1024
WXGA1—60
WXGA2—60
60
60
1280 × 768
1360 × 768

Epson BrightLink 455Wi Specifications

Projection

white light output	2500 lumens
color light output	2500 lumens
native resolution	1280 x 800 (WXGA)
throw ratio range (16:10)	0.37 – 0.50
throw ratio range (4:3)	0.44 – 0.59
throw ratio range (16:9)	0.37 – 0.50

Lamp Specifications

lamp type	E-TORL 230 W UHE
lamp life (ECO mode)	up to 3500 hours
lamp life (normal mode)	up to 2500 hours

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	363 W
network on standby power	10 W
network off standby power	0.3 W

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	35 dB
fan noise (ECO mode)	28 dB

Weight and Dimensions

dimensions	14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate	14.1 lb
weight without slide plate	12.9 lb