EasyManuals Logo
Home>Epson>Projector>BrightLink 455Wi

Epson BrightLink 455Wi User Manual

Epson BrightLink 455Wi
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
Using the Projector Menus 97
7. When the message Save this image as the User’s Logo?
appears, select
Yes and press Enter. Saving the logo may take a
few moments. Do not use your projector, remote control, or
video source while the logo is being saved.
8. When you see the message
Completed, press Menu to exit.
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there’s no signal, or the screen you see
when you press the
A/V Mute button (see page 74).
1. Press the
Menu button, highlight the Extended menu, and press
Enter.
2. Select
Display and press Enter.
3. Choose from these display options:
Set Display Background to Logo to display your image
when there is no signal.
Set Startup Screen to On to display your image when the
projector is warming up.
Set A/V Mute to Logo to display your image when you press
the
A/V Mute button.
4. When you’re finished, press
Menu to exit.
Disabling the Projector’s Buttons
When you enable the Control Panel Lock function, you can lock all of
the projector’s buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the
Menu button, highlight the Settings menu, and press
Enter.
2. Select
Control Panel Lock and press the Enter button.
note
You can lock these settings to
prevent them from being
changed without a password
(see page 94).

Table of Contents

Other manuals for Epson BrightLink 455Wi

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson BrightLink 455Wi and is the answer not in the manual?

Epson BrightLink 455Wi Specifications

Projection IconProjection
white light output2500 lumens
color light output2500 lumens
native resolution1280 x 800 (WXGA)
throw ratio range (16:10)0.37 – 0.50
throw ratio range (4:3)0.44 – 0.59
throw ratio range (16:9)0.37 – 0.50
Lamp Specifications IconLamp Specifications
lamp typeE-TORL 230 W UHE
lamp life (ECO mode)up to 3500 hours
lamp life (normal mode)up to 2500 hours
Power IconPower
power supply voltage100 – 240 V ±10%, 50/60 Hz
power consumption363 W
network on standby power10 W
network off standby power0.3 W
Operating Environment IconOperating Environment
operating temperature41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)35 dB
fan noise (ECO mode)28 dB
Weight and Dimensions IconWeight and Dimensions
dimensions14.5" x 19.0" x 6.1" (W x D x H)
weight with slide plate14.1 lb
weight without slide plate12.9 lb

Related product manuals